Pipes, line pipes and pressure vessels
At Investmech, we offer the following:
- Strain, acceleration and temperature measurements on high temperature pressure vessels, ladles, refractory, furnaces, steam pipes, etc.
- Strain and acceleration measurements and control on pipes.
- Remaining life prediction of underground pipes subjected to various environmental conditions.
- Modal analysis and operational mode extraction on pressure vessels
Previous Work
Pressure vessel fatigue
Design and fatigue assessment on pressure vessels using ASME and PD codes.
Fit-for-purpose calculations on flawed water line pipe
- Determine flaw size dependent design pressure
- Fracture Mechanics to predict crack growth and failure mode
Corrosion of pipelines
- Monte Carlo and Fracture Mechanics calculations to calculate remaining life of cyclically pressurised underground and surface line pipe life subject to environment dependent pit corrosion depth and density distribution.
- Root cause assessment for collapse of pipes in mine shaft.
Flow and pressure distribution
Investmech did several projects where flow & pressure distribution in water and slurry pipelines were calculated, including heat exchangers.
Electrode arm hydraulic system transient analysis
- Accelerated wear on electrodes.
- Related to unsteady control.
- Transient analysis of coupled hydraulic & mechanical system. Hydraulic resonance to be responsible.
- Pipe thickness, size & anchoring changed to solve problem.
Briquette impregnation reactor design audit
- Design compliance
- Drawings compliance
- Welding procedure specifications
- Design temperature of reactor: 300 °C.
- Design pressure: 700 kPa
Root cause assessment of the failure of a pressurised dust catcher
- Inspection of failed sections
- Metallurgical inspections
- Pressure vessel code driven design calculations
- Fatigue calculations
- Fracture Mechanics
- Design temperature of reactor: 300 °C
- Design pressure: 700 kPa
Design of pulsating pressure hutch tanks for the iron ore processing industry
Limited mission profile of project:
- Pressure frequency: 1 Hz
- Complex geometry requiring finite element analysis (FEA)
Included in the design was:
- Manufacturing drawings
- Welding Procedure Specifications
Work With Us
If you want to work with us or have any questions, please feel free to get in touch using any of the methods listed below. We will get back to you as soon as possible.
Phone Number
+27 12 664-7604
Address
8 Topaz Ave, Lyttleton Manor, Centurion, 0157
info@investmech.com